Xiamen YISHUN Carbon Composite Technology CO., LTD

cat1

Blog

Home |

Blog

Blog

  • WATER DROP REINFORCED NIPPLE HOLE
    • November 20, 2018

    This design is our totally new idea. It comes from chinese traditional arch bridges which is strong enough to stand more than 1000 years. With this design, our rims looks like combined by many different small arch bridges. The spoke hole beds is designed to like the piers of the bridge. So the total wheelset is supported by 28 pcs of piers. This makes the rims more impact resistant.

    Read More...
  • IMPACT RESISTANT DESIGN(Hookless&trapezium tire bead design)
    • November 20, 2018

    Now most MTB rims are with hookless design because of a better impact resistance. Starting from this idea, we still make an improvement. The bead of our MTB rims is also hookless design, but it's not with a equal-thickness from top to bottom. We designed a wider thickness in the bottom to better "support" the impact. This design could improve the impact-resistance around 10%. We also work out a sp...

    Read More...
  • CARBON BICYCLE RIM MID HOOK TIRE BEAD DESIGN
    • October 31, 2018

    CARBON RIM MID HOOK TIRE BEAD DESIGN For our disc brake specific rim family, we ultimately worked out a Mid-Hook design. With this technology, the rims could be as impact resistant as MTB rims, and they are around 80g lighter than rim brake models. however, they could take much more higher tire pressure, as high as to 90PSI with a 28C tire. 

    Read More...
  • CARBON WHEELS IMPACT TEST
    • October 30, 2018

    CARBON WHELLS IMPACT TEST This test is mainly for MTB wheels to make sure the rim's impacting strength is qualified. It will required 3 times impact at different position from a required impacting height. Different wheels would have different impacting height requirements.   ● Test condition: air pressure 28psi, special shaped steel anvil go     to impact the wheel directly fro...

    Read More...
  • carbon bike wheels BRAKE DISTANCE TEST&RIDING FATIGUE TEST
    • October 26, 2018

    CARBON WHELLS BRAKE DISTANCE TEST This test is reflect how the brake track and brake pads perform together. For a good rim brake wheel, we not only demand it to be heat-resistant enough, also wish to have a good braking performace with less noise and shorter braking distance no matter in dry or wet conditions. ● Test condition: Air pressure 120psi, load 100kgf , brake lever tforce 18kg, speed 25km...

    Read More...
  • CRABON ROAD RIM INFLATION TEST
    • October 24, 2018

    Inflation test is very important for every rim brake clincher wheels, which usually apply a quite high tire pressure. If the rim could pass this test, it means the rim's structurer is strong&reliable enough, and it will reduce the wheel failure risks greatly.  every each YISHUN rim brake wheels have to pass this test. ● Test Condition: 150psi air pressure, test one time. ● Test Standard: ...

    Read More...
  • Carbon Road Aero TT Handlebar For Triathlon And Time Trial Bikes HBT02
    • October 09, 2018

    Product                                     Carbon triathlon aero tt handlebars Material High modulus Toray T700  carbon fiber Width 42cm (Center to Center) Spacers 10mm, 20mm Steerer tube Diameter 31.8mm Weight 600+-/10g Test Standard ISO4210 Warranty  1 years

    Read More...
  • Full Carbon Aero Road Handlebar HBR04
    • October 08, 2018

    Product                                     Full carbon aero road handlebar  Material High modulus Toray T700  carbon fiber Size 40, 42, 44cm (Center to Center) Reach 84.5mm                                  &nb...

    Read More...
  • The Cycle Show booth H2, meet 2019 New Carbon Rims!
    • October 18, 2018

    The Cycle Show NEC, Birmingham 28-30 SEP., meet 2019 New Carbon Rims! The Cycle Show Carbonal booth position, Stand H2. Welcome to visit our booth at 2018 The Cycle Show - the UK' s biggest cycling showcase. It will be great to meet you and discuss with us about newest carbon bicycle rim and wheel products! Booth no.: H2 Date: Septermber. 28 - 30th, 2018 Address: NEC, Birmingham, United Kingdom ht...

    Read More...
  • An overview of international mountain biking events
    • September 19, 2018

    An overview of international mountain biking events. UCI Mountain Bike World Cup. The UCI Mountain Bike World Cup is a multi-round mountain bike racing series that is sanctioned by the Union Cycliste Internationale. The first World Cup series – which was composed of cross-country events – was held in 1991. The Downhill World Cup was inaugurated two years later, and the Dual Slalom World Cup was la...

    Read More...
    • 1

    • 2

    2

NEWSLETTER

Enter your e-mail and subscribe to our newsletter.

Copyright © 2015-2018 Xiamen YISHUN Carbon Composite Technology CO., LTD.All Rights Reserved.dyyseo.com

   

Xiamen YISHUN Carbon Composite Technology CO., LTD

Chat now

Live Chat

    Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.